Ruimin Chen

Assistant Professor in Residence

Mechanical Aerospace Mfg Engr


Education

  • Ph.D., Industrial Engineering, The Pennsylvania State University (2021)
  • M.S., Dual-title in Industrial Engineering & Operations Research, The Pennsylvania State University (2018)

Awards and Honors

• 2023, UConn OVPR/AAUP Faculty Travel Award
• 2020, 3rd Place, Doctoral Student Colloquium Awardee, Institute of Industrial and System Engineering (IISE) Annual Conference & Expo
• 2019, Participant, Doctoral Student Colloquium, Institute for Operations Research and Management
Sciences (INFORMS) Annual Meeting, Seattle, WA
• 2019, NSF Student Travel Award, IEEE CASE 2019, Vancouver, Canada
• 2019, Featured Article in ISE Magazine, Institute of Industrial and System Engineers (IISE) Transactions on Healthcare Systems Engineering
• 2019, Best Poster Award, Northeastern Regional Conference on Complex Systems, Binghamton, NY
• 2019, Best Poster Award, Poster Competition in Industrial Advisory Board Meetings, NSF Center for
Health Organization Transformation (CHOT), Seattle, WA
• 2019, CoE Graduate Student Travel Support, Penn State
• 2019, Research Scholar, NSF Center for Health Organization Transformation (CHOT)
• 2019, INFORMS Student Chapter Annual Award, Institute for Operations Research and Management
Sciences (INFORMS) Annual Meeting, Seattle, WA
• 2018, NSF INTERN Scholarship, IBM Thomas J. Watson Research Center, Yorktown Heights, NY
• 2016, Outstanding Undergraduate Senior Design, Southeast University, China

Publications

Journal Articles
1. Z. Chen, D. Hoang, F. Jalil Piran, R. Chen, and F. Imani, “Federated Hyperdimensional Computing for Hierarchical and Distributed Monitoring with Application in Manufacturing”, Internet of Things, 2025. DOI: https://doi.org/10.1016/j.iot.2025.101568

2. Z. Chen, H. Chen, M, Imani, R. Chen, and F. Imani, “Vision Language Model for Interpretable and Finegrained Detection of Safety Compliance in Diverse Workplaces”, Journal of Expert Systems with Applications, 2024. (Under Review) DOI: https://doi.org/10.48550/arXiv.2408.07146

3. D. Hoang, H. Errahmouni, H. Chen, S. Rachuri, N. Mannan, R. ElKharboutly, M. Imani, R. Chen, F. Imani,“Hierarchical Representation and Interpretable Learning for Accelerated Quality Monitoring in Machining Process,” CIRP Journal of Manufacturing Science and Technology, Vol. 50, P 198-212, 2024. DOI: https://doi.org/10.1016/j.cirpj.2024.02.010

4. R. Chen, M. Sodhi, M. Imani, M. Khanzadeh, A. Yadollahi, and F. Imani, “Brain-inspired Computing for In-process Melt Pool Characterization in Additive Manufacturing,” CIRP Journal of Manufacturing Science and Technology, Vol.41, P380-390, 2023. DOI: https://doi.org/10.1016/j.cirpj.2022.12.009

5. R. Chen, M. Khanzadeh, E. W. Reutzel, and F. Imani, “Heterogeneous Defect Characterization and Design-quality Interaction in Metal Additive Manufacturing,” Journal Additive Manufacturing Letters, Vol.3, p100042, 2022. DOI: https://doi.org/10.1016/j.addlet.2022.100042

6. R. Chen, M. Imani, and F. Imani, “Joint Active Search and Neuromorphic Computing for Efficient Data Exploitation and Monitoring in Additive Manufacturing,” Journal of Manufacturing Processes, Vol. 71, p743-752, 2021. DOI: https://doi.org/10.1016/j.jmapro.2021.09.048

7. R. Chen, Y. Lu, P. Witherell, T. Simpson, S. Kumara, and H. Yang, “Ontology-driven Bayesian Network for Causal Inference and Quality Assurance in Additive Manufacturing,” IEEE Robotics and Automation Letters, Vol. 6, No. 3, p6032-6038, 2021. DOI: https://doi.org/10.1109/LRA.2021.3090020

8. R. Chen, P. Rao, Y. Lu, E. W. Reutzel, and H. Yang, “Recurrence Network Analysis of Design-quality Interactions in Additive Manufacturing,” Additive Manufacturing, Vol. 39, p101861, 2021. DOI: https: //doi.org/10.1016/j.addma.2021.101861

9. H. Yang, R. Chen, and S. Kumara, “Stable Matching of Customers and Manufacturers for Sharing Economy of Additive Manufacturing,” Journal of Manufacturing Systems, Vol. 61, p288-299, 2021. DOI: https: //doi.org/10.1016/j.jmsy.2021.09.013

10. R. Chen, F. Imani, and H. Yang, “Heterogeneous Recurrence Analysis of Disease-altered Spatiotemporal Patterns in Multi-channel Cardiac Signals,” IEEE Journal of Biomedical and Health Informatics, Vol. 24, No. 6, p1619-1631, 2019. DOI: http://dx.doi.org/10.1109/JBHI.2019.2952285 (Best poster award in the 2019 Northeastern Regional Conference on Complex Systems) 11. R. Chen, F. Imani, E. Reutzel, and H. Yang, “From Design Complexity to Build Quality in Additive Manufacturing – A Sensor-based Perspective,” IEEE Sensor Letters, Vol. 3, No. 4, p1-4, 2018. DOI:http://dx.doi.org/10.1109/LSENS.2018.2880747

12. Q. Hu, R. Chen, H. Yang, and S. Kumara, “Privacy-preserving Data Mining for Smart Manufacturing,” ASTM International Journal of Smart and Sustainable Manufacturing Systems – Special Issue on Technology Infrastructure for Enabling Smart Manufacturing, 2020. DOI: https://doi.org/10.1520/SSMS20190043

13. C. Kan, R. Chen, and H. Yang, “Image-guided Quality Control of Biomanufacturing Process,” Procedia CIRP, Vol. 65, p168-174, 2017. DOI: https://doi.org/10.1016/j.procir.2017.04.034

14. F. Imani, B. Yao, R. Chen, P. Rao, and H. Yang, “Joint Multifractal and Lacunarity Analysis of Image Profiles for Manufacturing Quality Control,” ASME Journal of Manufacturing Science and Engineering, Vol. 141, No. 4, p044501-044501-7, 2019. DOI: https://doi.org/10.1115/1.4042579

15. F. Imani, C. Cheng, R. Chen, and H. Yang, “Nested Gaussian Process Modeling and Imputation of High dimensional Incomplete Data Under Uncertainty,” IISE Transactions on Healthcare Systems Engineering, Vol. 9, No. 4, p315-326, 2019. DOI: https://doi.org/10.1080/24725579.2019.1583704 (Featured Article
in ISE Magazine 2019)

16. F. Imani, R. Chen, E. Diewald, E. Reutzel, and H. Yang, “Deep Learning of Variant Geometry in Layerwise Imaging Profiles for Additive Manufacturing Quality Control,” ASME Transactions Journal of Manufacturing Science and Engineering, Vol. 141, No. 11, p11100, 2019. DOI: https://doi.org/10.1115/1.4044420

Peer-reviewed Conference Papers

17. R. Chen and S. Motaref, “Integrating Computerized Tools and Hands-on Experience into Six Sigma Curricula for Engineering Education,” American Society of Mechanical Engineering – International Mechanical Engineering Congress & Exposition (IMECE), 2024. DOI: https://doi.org/10.1115/IMECE2024-143639

18. Z. Chen, D. Hoang, R. Chen, and F. Imani, “Hierarchical Hyperdimensional Computing for Real-Time Data Aggregation and Interpretable Quality Monitoring in Manufacturing”, ASME The International Mechanical Engineering Congress and Exposition (IMECE), 2024. DOI: https://doi.org/10.1115/IMECE2024-145875

19. D. Hoang*, H. Chen, M. Imani, R. Chen, and F. Imani, “Brief Paper: Multi-Task Brain-Inspired Learning for Interlinking Machining Dynamics With Parts Geometrical Deviations”, ASME Manufacturing Science and Engineering Conference (MSEC), 2024. DOI: https://doi.org/10.1115/MSEC2024-125435

20. D. Hoang, N. Mannan, R. ElKharboutly, R. Chen, and F. Imani, “Edge Cognitive Data Fusion: From InSitu Sensing to Quality Characterization in Hybrid Manufacturing Process”, ASME Manufacturing Science and Engineering Conference (MSEC), 2024. DOI: https://doi.org/10.1115/MSEC2023-105170

21. D. Hoang, R. Chen, D. Mishra, S. K. Pal, and F. Imani, “Data Fusion Cognitive Computing for Characterization of Mechanical Property in Friction Stir Welding Process,” American Society of Mechanical Engineering – International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC), Vol. 87295, p. V002T02A055, 2023. DOI: https://doi.org/10.1115/DETC2023-117184

22. F. Imani and R. Chen, “Latent Representation and Characterization of Scanning Strategy on Laser Powder Bed Fusion Additive Manufacturing,” American Society of Mechanical Engineering – International Mechanical Engineering Congress & Exposition (ASME – IMECE), 2022. DOI: https://doi.org/10.1115/IMEC E2022-96019

23. R. Chen, M. Chen, and H. Yang, “Dynamic Physician-patient Matching in the Healthcare System,” 42nd Annual International Conference of the IEEE Engineering in Medicine and Biology Society, 2020. DOI: http://dx.doi.org/10.1109/EMBC44109.2020.9176324

24. F. Imani, R. Chen, C. Tucker, and H. Yang, “Random Forest Modeling for Survival Analysis of Cancer Recurrences,” Proceeding of the 15th IEEE International Conference on Automation Science and Engineering (CASE), Aug 22-26, 2019, Vancouver, BC, Canada. DOI: http://dx.doi.org/10.1109/COASE.2019. 8843271 (IEEE CASE invited session)

25. F. Imani, R. Chen, E. Diewald, E. Reutzel, and H. Yang, “Image-guided Variant Shape Analysis of Layerwise Build Quality in Additive Manufacturing,” Proceeding of the 14th International Manufacturing Science and Engineering Conference (MSEC), June 10-14, 2019, Erie, PA. DOI: https://doi.org/10.1115/MSEC 2019-3002

26. F. Imani, B. Yao, R. Chen, P. Rao, and H. Yang, “Fractal Pattern Recognition of Image Profiles for Manufacturing Process Monitoring and Control,” Proceeding of the 13th International Manufacturing Science and Engineering Conference, pp. V003T02A003, June 10 14, 2018, College Station, TX. DOI: http://dx.doi.org/10.1115/MSEC2018-652327.

27. F. Imani, C. Cheng, R. Chen, and H. Yang, “Nested Gaussian Process Modeling for High-dimensional Data Imputation in Healthcare Systems,” Proceeding of Institute of Industrial and System Engineering (IISE) Annual Conference, pp. 1312-1317, May 19-22, 2018, Orlando, FL. https://www.xcdsystem.com/iise/2018_proceedings/papers/FinalPaper_2294_0305070406.pdf

Thesis

28. R. Chen, “Data-driven Service Optimization and Quality Management in Cyber-physical Manufacturing Systems,” Ph.D. Thesis, The Pennsylvania State University, 2021

29. R. Chen, “Heterogeneous Recurrence Analysis of Vectorcardiogram Signals,” M.S. Thesis, The Pennsylvania State University, 2018

Contact Information
Emailruimin.chen@uconn.edu
Phone(860) 486-0415
Mailing Address191 Auditorium Road, Unit 3139, Storrs, CT 06269